Years of salt laden south westerlies will finish off a front door. Swollen bottom rail, paint blown off the exposed face, a threshold that lets water track across the hall tiles every time the rain comes in sideways. If yours has reached that stage, this checklist covers what to sort out before a joiner turns up with tools. RPG Carpentry & Joinery works on doors, frames and external joinery across South East Cornwall and Plymouth, and most of the headaches on fitting day trace back to decisions made weeks earlier. Work through the ten points below, then you can get a quote with real information behind it.
Indicative figures first, because it is the first thing most people ask in 2026. Typical UK supply prices for a quality hardwood or engineered timber external door depend on size, timber and glazing — ask RPG Carpentry for a free quote. Composite door supply prices depend on the specification chosen, so ask RPG Carpentry for a free quote. Fitting labour into a sound existing frame costs less per door, rising once the frame, sill or surrounding structure has to come out — ask for a free quote. Those are general UK ranges to help you budget rather than a quotation, and whoever you ask, check whether the price includes VAT, ironmongery, making good and taking the old door away.
Before you order anything
1. Decide whether the frame goes too
A leaf on its own is the cheaper job, but only if the existing frame is square, sound and properly bedded. Push a bradawl into the bottom of each jamb and into the sill. If it sinks in, you have rot. Ask your joiner whether repair or replacement is the sensible option. Hanging a brand new door in a tired frame is where money gets wasted.
2. Measure the structural opening, not the old door
Old doors get planed, packed and trimmed over the years, so the leaf you take off is rarely a true size. Measure the brick, block or stone opening for width and height in three places each, and measure the wall thickness while you are there. Those numbers drive the frame size and tell you straight away whether you are in standard sizes or heading for a bespoke one.
3. Check what is over the opening
Look above the door for a lintel, a timber bressummer or a brick arch. In older Cornish cottages built of cob or random stone, there may be nothing obvious at all, just granite reveals and a lot of trust. Stepped cracking above the head suggests movement, and that deserves a proper look before anyone pulls a frame out. Widening the opening takes you into structural work with building control involved.
4. Match the material to the exposure
A door tucked into a sheltered north facing porch in Liskeard has a far easier life than one taking the weather at Looe or Downderry. For badly exposed positions, engineered timber cores, accoya or a good hardwood hold their shape better than softwood. A decent canopy or overhang makes more difference to how long the finish lasts than most people expect.
5. Think about the threshold and drainage
Most water ingress at a front door happens at the bottom. You want a weathered sill with a drip groove, a threshold suited to the floor level inside, and ideally a weatherbar. If you need level access for a wheelchair or pushchair, say so early, because low threshold details have to be designed rather than improvised on the day.
Specification and permissions
6. Confirm the energy requirement
Approved Document L of the Building Regulations sets a limiting U value for replacement doors in existing dwellings, 1.4 W/m²K in England at the time of writing. Ask the supplier for the figure on your chosen door, check it is the one in force when you order, and keep the paperwork. Replacement doors are notifiable, so either a competent person scheme registration or a building control application applies. Use the relevant local authority, Cornwall Council in Cornwall or Plymouth City Council in Plymouth.
7. Check listed building and conservation status
If the property is listed, replacing an external door usually needs listed building consent, and that covers the frame and ironmongery as well as the leaf. Conservation areas and properties within the Cornwall National Landscape can carry extra constraints on style, glazing and finish. Listed buildings and Article 4 directions may affect door replacement. Check with the local planning authority before ordering.
8. Pin down the ironmongery and security
Hinges, lock, cylinder, letterplate, handle, numerals, and a closer if you want one. Three hinges rather than two on a heavy hardwood door. Near the coast, stainless or marine grade fittings are worth the extra, because standard finishes pit quickly in salt air. Decide on a multipoint lock early too, since it has to be routed in rather than added later. Ask whether any glazing needs safety glass, particularly where it is close to floor level or doors.
Finishing, timing and the quote
9. Agree who finishes the door and when
Bare timber left unfinished through a wet Cornish autumn takes on moisture and moves. Ideally the door is primed or base coated on all six faces, top and bottom edges included, before it is hung, then top coated once fitted. Put it in writing whether painting sits with your joiner or your decorator, because that gap is a common source of argument.
10. Plan the day itself
There will be an open hole in your wall for part of a day. Clear the hallway, move anything precious away from the opening, shut the dog in another room and sort parking close by for tools and the new door. Ask what happens if the weather turns, and check the quote says who takes the old door and frame away.
A quick word on quotes
When you compare prices, compare scope. One quote may include a new frame, sill, ironmongery, making good the plaster reveals and removing the old door. Another may be the leaf hung and nothing more. Ask for the breakdown in writing, ask the lead time on a made to order door, and ask to see similar work nearby. The portfolio is worth a look if you want a sense of finished jobs locally.
Get through these ten points and you will know your sizes, your material, your permissions and your budget before anyone picks up a chisel. If you are ready to talk through a new front or back door in Liskeard, Saltash, Callington or across the bridge to Plymouth and Tavistock, get in touch with RPG Carpentry & Joinery with your measurements and a photo of the existing opening.
Frequently asked questions
Do I need building control approval to replace an external door in Cornwall?
Replacing an external door in an existing dwelling is notifiable work under the Building Regulations. It can be certified either by an installer registered with a competent person scheme or through a building control application to Cornwall Council. Keep the certificate safe, because conveyancing solicitors tend to ask for it when you sell.
How long does it take to fit a new external door?
A straightforward swap into a sound existing frame is often a single day job. Replacing the frame, sill and threshold, making good the reveals and dealing with any structural surprises can push it to two days or more. Bespoke doors also carry a manufacturing lead time before fitting can be booked.
Is a timber or composite door better for a coastal Cornish property?
Both can work. Composite doors need little maintenance and cope well with driven rain. Well specified timber, particularly engineered hardwood or accoya, suits period and listed properties where appearance matters and may be the only option where consent is required. Exposure, budget and the look you want will settle it.
Can an old door opening be made wider?
Sometimes, but it becomes structural work rather than joinery. Widening an opening usually means a new lintel and temporary support, and it needs building control sign off. Have the wall and whatever sits above it assessed before you assume it is possible.